AMPLIFIERS>EGORILLA SERIES AMPLIFIERS

The Jungle is intense. You’d have no fear if you were a Gorilla! New for 2010, the Gorilla amps are the toughest amps available. The Gorillas feature an aggressive cast aluminum heatsink, all MOSFET topology and have all connections on the front side. The top is black acrylic and boasts the new Gorilla logo to show that you are the king of the power jungle!

      Common Features

2/4 Channel

• Brilliant Silver Texture Coat Finish
• MOSFET Power Supply
• Pulse Width Modualtion Circuitry
• Three-Way Protection Circuitry (short, thermal & overload)
• 2 Ohm Stereo, 4 Ohm Bridged Stable
• Tri-Mode Capable
• Selectable Hi/Full/Low Pass Crossovers
• Pre-Amp Outputs (ex. 1200/4)
• Dash Mount Remote Gain Control (2 ch. models)

• 200mV - 6V Low Level Input Sensitivity
• Variable 12dB 30-250Hz LPF
• Variable 12dB 50-500Hz HPF
• Variable 0-12dB 45Hz Bass Boost
• Variable 12 dB 15-50Hz Subsonic Filter (ex. 800/2)
• Frequency Response: 10Hz - 30kHz
• Signal-to-Noise Ratio: 97dB
• Total Harmonic Distortion: .02%
• 4 ga. Power & 8 ga. Speaker Terminals



Class D

• Brilliant Silver Texture Coat Finish
• Hi-Speed Digital Circuitry
• Regulated PWM Power Supply
• Three-way Protection Circuitry (short, thermal & overload)
• 1 Ohm Load Stable
• Bridged Synchronization (strap amps together for double power!)
• 200mV-6V Low Level Inputs
• Pre-Amp Outputs

 

• Variable 12dB 40-200Hz LPF
• Variable 12dB 20-50Hz Subsonic Filter
• Variable 0-18dB 45Hz Bass Boost
• Frequency Response: 15-150Hz
• Signal-to-Noise Ratio: 100dB
• Total Harmonic Distortion: .5%
• 1800 Phase Switch
• Direct Input 4 ga. Power & 8 ga. Speaker Terminals



ABOUT US | PRODUCTS | SUPPORT | CONTACT US | HOME | TOP
©2009 Copyright of SPL Audio Company,Inc.