SPLW-152X
2,800 Watt 15" Subwoofer
- 2.5" Dual 2-Ohm 4-Layer Voice Coil
- Candy Apple Red Finish w/ Diamond Cut Accents
- Die Cast Aluminum Voice Coil Heatsink
- Non-Pressed Pulp Cone
- Polyether Foam Surround
- Nickel Plated 8ga Compression Wire Terminals
- Dual Poly-Cotton Spiders
- Die-Cast Aluminum Frame
- Vented Pole Piece
- RMS 1,500 Watts
- Peak 2,800 Watts
| T/S Specs |
SPLW-152X |
| Fs |
25.4 |
| Qms |
5.658 |
| Vas |
4.2 |
| Xmax mm |
15 |
| Xmech mm |
25 |
| Qes |
0.412 |
| Re |
3.93 |
| Znom |
4 |
| BL |
20.9 |
| Power (Watts) |
1500 |
| Qts |
0.386 |
| SPL |
88.60 |
| V.C. Size (in.) |
2.5 |
| V.C. Imp |
DVC 2 |
| Hole Dia. (in.) |
13.78 |
| Depth (in.) |
8.125 |
| Box Sizes |
|
| Sealed |
2.00 |
| F3 Hz |
49.06 |
| Ported |
4.00 |
| Port |
(2) 4x11.75 |
| Tune Freq. (Hz) |
35.10 |
| F3 Hz |
30.66 |
- Cast Aluminum Heatsink
- The anodized blue dust cap on the SPLW subwoofer looks cool, and also serves a specific purpose. Because the dust cap is coupled to an aluminum voice coil former, it acts as a heatsink, extracting heat away from the voice coil, keeping it cool.
- Non-Pressed Pulp Cone
- Ask any sound quality enthusiast what woofer cone material they prefer, and they will all say PAPER. With that in mind, we used a beefy non-pressed pulp paper cone. The aluminum dust cap fits into recesses of the cone for additional bracing.
- Re-cone Kit Available
- For those of you who live extreme and push an SPLW beyond its limits, a pre-assembeled re-cone kit is available. Due the the precise nature of reconing subwoofers, we recommend re-coning performed by an exeperienced car audio professional.
